FAW RHD 340HP Cargo Hydraulic Truck Mounted SQZ160 8Ton Mobile Manipulator Knuckle Boom Crane
FAW RHD 340HP Cargo Hydraulic Truck Mounted SQZ160 8Ton Mobile Manipulator Knuckle Boom Crane, is a heavy-duty special-purpose vehicle designed for lifting, loading, and transporting cargo, often used in construction, logistics, and material handling.
Key Features
- Hydraulic Operation: The crane is powered by the truck's hydraulic system (via a PTO), allowing for smooth and precise manipulation.
- Knuckle Boom Advantage: Provides excellent flexibility and maneuverability in congested areas compared to a straight/telescopic boom crane.
- RHD Configuration: Tailored for countries where traffic drives on the left side of the road.
- High Power Engine: The 340HP engine is necessary to handle the weight of the crane, the heavy cargo, and the rugged environments where these trucks typically operate.
- Safety Features: Usually includes safety devices like a load indicator, hydraulic safety valves, counterbalance valves, and a hook safety device.
- Controls: Typically equipped with double-side operating controls and often an optional remote control system.
Truck crane, also called boom truck crane, mobile truck crane, truck mounted crane, hydraulic folding truck crane, telescopic straight boom crane, truck with crane, crane lorry, hydraulic arm crane for trucks, pickup truck mounted crane, light truck with crane, folding arm hydraulic lift platform, hydraulic crane telescopic boom, mobile crane price, self loader truck with boom crane, new forland lorry truck mounted crane, telescopic boom truck mounted crane, flatbed knuckle boom truck crane, 6 wheelers truck with crane boom truck cranes sale etc
A crane mounted on a truck carrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own. Many older operators favor the two-engine system due to leaking seals in the turntable of aging newer design cranes.
Product Purpose
- Purpose: It's used for lifting and transporting all kinds of bulk cargo, and also applied in jetty and construction work.
- Main parts: Crane. (Different lifting capacities match different chassis.)
- Advantage: One truck combines the functions of crane and dump truck.
Technical Specifications: FAW RHD 340HP Cargo Hydraulic Truck Mounted SQZ160 8Ton Mobile Manipulator Knuckle Boom Crane
Truck Chassis Specifications
| Parameter | Specification | Notes |
| Brand | FAW (First Automotive Works) | Jiefang J5P or similar heavy-duty cab. |
| Driving Type | 6x4 | 6 wheels total, 4 driven wheels (tandem rear axle). |
| Driving Position | RHD (Right Hand Drive) | For markets driving on the left side of the road. |
| Engine Model | WP10.340E32 (Weichai) or equivalent | In-line 6-cylinder, water-cooled, turbo-charged, inter-cooled Diesel. |
| Engine Power | 340 HP | As specified in the product name. |
| Max Torque | 1250 | Typical torque for a 340HP engine. |
| Emission Standard | Euro III / Euro V | Varies by export market requirement. |
| Gearbox | Manual | Typically a FAST 9-speed or 10-speed transmission. |
| Overall Dimensions | 9800 - 12000 *2500 *3150 - 3850 mm | Varies based on cargo box and crane configuration. |
| Wheelbase | 3800 + 1350 mm | Common for 6x4 FAW chassis. |
| Gross Vehicle Weight (GVW) | 25,000 kg | Maximum allowable vehicle weight. |
| Curb Weight | 12,800 - 15,800 kg(approx.) | Weight of the truck with crane and cargo box, empty. |
| Tire Specification | 11.00R20 or 12.00R20 | Radial tires. |
| Brake System | Air Brake | Standard heavy-duty braking system. |
Crane Specifications (SQZ160 / SQ160ZB3)
| Parameter | Specification (SQZ160 / SQ160ZB3) | Notes |
| Crane Type | Hydraulic Knuckle Boom (Folding Arm) | Excellent for precise loading/unloading in tight spaces. |
| Max. Lifting Capacity | 8,000 kg or 8 Tons | Max lift at minimum radius. |
| Max. Lifting Moment | 160 kN | Also commonly specified up to 20 T |
| Boom Configuration | 3 or 4 Boom Sections | Hexagonal or Pentagonal structural design. |
| Max. Working Radius | 9.6 m to10.2 m(approx.) | Range for standard SQZ160 models. |
| Max. Lifting Height | 11.3 m to 13 m(approx.) | Max height from the ground. |
| Lift Capacity at Max. Radius | Varies, e.g., 1700 kg | Load chart indicates reduced capacity with extension. |
| Rotation Angle | 360All Rotation | Full continuous slewing. |
| Installation Space | 1150 mm to 1400 mm | Space required for crane mounting on the chassis. |
| Crane Weight (Self-Weight) | 2850 kg to 3500 kg(approx.) |
Hydraulic System & Cargo Box Specifications
| Parameter | Specification | Notes |
| Hydraulic Working Pressure | from26 Mpato from28 MPaa | (from260 - 280 bara) |
| Oil Tank Capacity | from120 La to from160 La |
| Outrigger Type | Hydraulic H-Type (Front & Rear) | fromHa-shaped outriggers for maximum stability. |
| Outrigger Span | from2.28 m - 5.58 ma (approx.) | Width of spread for stability. |
| Control System | Double-sided manual controls | Optional: Wireless Remote Control. |
| Safety Devices | Load Indicator, Hydraulic Safety Valve, Counter Balance Valve, Over-wind Alarm. | Essential for safe operation. |
| Parameter | Specification | Notes |
| Cargo Box Length | from6200 ma to from8400 ma | Varies based on crane size and chassis wheelbase. |
| Cargo Box Width | from2300 ma to from2400 ma | Standard width. |
| Cargo Box Height (Side) | from550 ma to from700 ma |
| Cargo Box Material | fromQ235a Carbon Steel (or stronger) |
General Technical Parameters
| General Technical Parameters |
| Overall Dimension | 11980*2500*3980 (mm) |
| Gross Vehicle Weight | 24900(Kg) |
| Curb Weight | 15800(Kg) |
| Chassis Specification |
| Chassis Brand | faw |
| Drive model | 6*4 |
| Cabin | RHD |
| Number of Passengers | 3 |
| Engine | Model | 4-stroke direct injection , 6-cylinder in-line with water cooling, inter-cooling, EGR |
| Power | WP10.340E32 |
| Emission standard | EURO 3 |
| Displacement | 8300(ml) |
| Fuel type | Diesel |
| Gearbox | 9Forwards & 1Reverse |
| Brake System | Air break |
| Wheel Base | 1850+4600+1400 mm |
| Front/Rear Axle Loading | 8000/11500(Kg) |
| Approach/Departure Angle | 23/12(°) |
| Overhang | 1250/3545(mm) |
| Tire | 11.00R20 |
| Max Driving Speed | 90(km/h) |
| Upperstructure Specification |
| Cargo Body | Dimension | 7000*2300*550(mm) |
| Material | Q235 carbon steel |
| Cargo Thickness | Side 1.5mm, Bottom 2.5mm |
| Working System | Boom Type | Straight 4-Arm telescopic boom |
| Crane | Crane Brand | X CMG |
| Range of Sprayer | 20m |
| Max Lifting Moment | 25(T.M) |
| Max Lifting Capacity | 16000(kg) |
| Max lifting height | 12(m) |
| Rotation angle | 360(°) |
| Installation space | 1150(mm) |
| Recommented power | 30(kw) |
| Maximum working pressure | 26(Mpa) |
| Max Flow | 63(l/min) |
| Crane weight | 3800(kg) |
| Oil tank capacity | 160(L) |
| Leg | Leg type | H type |
| Leg Span | 2.28-5.9(m) |
| Hydraulic system | Pressure | 18(M pa) |
| Capacity | 70(l) |
| Other Configuration | Control system in 2 side; diamond palt, yellow warning fire; 2.5T arm, etc. |
| Options | Caution light, air condition, inlet valve, medicine tray, pneumatic valve, cylinder, etc. |
Application
FAW RHD 340HP Cargo Hydraulic Truck Mounted SQZ160 8Ton Mobile Manipulator Knuckle Boom Crane is a highly versatile piece of heavy equipment. Its core advantage lies in combining the mobility and cargo capacity of a truck with the precision and reach of an articulating (knuckle boom) crane.
About Chengli Special Automobile Co., Ltd:
- Establishment: Founded in September 2004.
- Status: It is a core enterprise of the larger CLW Group, and is a designated large-scale manufacturer of special vehicles by the Chinese government.
- Scale: The group covers a large area (often reported as over 2,000 to 3,000 acres), employs thousands of staff (over 8,000 to 12,600), and has a significant annual production capacity (up to 100,000 special vehicles).
- Recognition: It is recognized as a "National High-tech Enterprise" and has been listed among China's Top 500 Private Enterprises. Its "CHENGLIWEI (CLW)" brand is a well-known trademark in China.
Established in Sep. 2004,Chengli Special Automobile Co., Ltd is an important branch of CLW group with registered capital 100,000,000 RMB(14 millions US Dollars) and total capital 6,000,000,000(840 millions US Dollars).
Chengli Special Automobile Co., Ltd Overseas Market:
- Africa
- Africa is a major market for Chengli's products, especially for sanitation and general-purpose trucks.
- West Africa: Nigeria, Ghana, Senegal, Togo, Benin, Niger.
- East & Southern Africa: Tanzania, Kenya, Uganda, Malawi, Angola, Mozambique, Mali, Congo, Zimbabwe, South Africa.
- Southeast Asia & South Asia
- This region is crucial for both commercial and municipal vehicles, including fire trucks and LPG tankers.
- Southeast Asia: Philippines, Malaysia, Vietnam, Myanmar, Thailand, Cambodia, Laos, Singapore.
- South Asia: Bangladesh, Pakistan, Sri Lanka.
- Middle East and Central Asia
- Demand in these regions often focuses on tankers, construction, and specialized logistics.
- Middle East: Often referred to as a key market, though specific country names vary.
- Central Asia: Kazakhstan, Uzbekistan, Russia, Mongolia.
- South America
- The company has established a presence in several South American countries.
- Key Countries: Peru, Bolivia, Panama, Chile, Ecuador, and Venezuela (with reported large-scale orders).
Trucks from Chengli Special Automobile Co., Ltd have been sold to more than 29 provinces in China and more than 80 overseas countries and regions in Asia, Africa, South America, middle east and so on, such as Russia, Mongolia, Philippines, Vietnam, Cambodia, Myanmar, Laos, Kazakhstan, Uzbekistan, Kyrghzstan, Tanzania, Zambia, Nigeria, Australia, Chile, Bolivia, Ethiopia, Sudan, Malaysia, Congo, El Salvador, Iraq, New Zealand, Chile, Bolivia, Argentina and also truck body for client drawing
